The 0.2 mL tubes from CAPP are 21mm high (21.8mm for ExpellPlus). All CAPP 0.2 mL PCR tubes are DNA, DNase, RNA, RNase, Pyrogen free and autoclavable. CAPP 0.2 mL PCR tubes are offered in two product lines: Expell 0.2 mL PCR tubes, which are highly recommended for labs aiming towards high quality operation and working on a restricted budget; and ExpellPlus 0.2 mL PCR tubes securing ultimate quality of the most critical applications.
Both lines come with 0.2 mL PCR tubes as individual single tubes with caps and as strips of 8 tubes with or without caps. On the top of that 0.2 mL PCR plates are availalbe in multiple options.
ExpellPlus 0.2 mL PCR Tubes for the outmost low evaporation rate
The ExpellPlus 0.2 mL PCR Tubes are the ultimate choice for the most critical applications, offering an evaporation rate as low as 3%! Equipped with a V-shaped bottom, ExpellPlus 0.2 mL PCR tubes allow the maximum sample recovery. On the top of that, ExpellPlus 0.2 mL PCR tubes are made of high quality polypropylene and have ultra thin walls for the ultimate temperature transmission and minimal condensation. The specially polished interior of ExpellPlus 0.2 mL PCR tubes minimizes the protein adhesion.
0.2 mL PCR Tubes acc. to Top Cleanliness Standards
CAPP 0.2 mL PCR tubes are guaranteed free of PCR contaminants. Manufactured in a cleanroom facility, CAPP 0.2 mL PCR tubes are subjected to rigorous quality control to ensure they are free from common PCR contaminants such as RNA, RNases, DNA, DNases, pyrogens, and other particulate matter.
Excellent thermal properties of CAPP 0.2 mL PCR Tubes
The thin-walled CAPP 0.2 mL PCR tubes are made from world class polypropylene formulation and are guaranteed to provide excellent heat transfer during temperature cycling. The thin walls of each 0.2 mL PCR tube transfer heat efficiently into the reaction mix with minimum temperature impedance. As a result of the excellent heat transfer, CAPP 0.2 mL PCR tubes have some of the lowest condensation rates. The caps of CAPP 0.2 mL PCR tubes (no pun intended) also ensure a tight seal that keeps evaporation rates well below 5% (Expell) and 3% (ExpellPlus). CAPP 0.2 mL PCR tubes can be safely autoclaved without melting.
CAPP decapping tool for Expell 0.2 mL PCR Tubes
As a bonus, Expell 0.2 mL PCR tubes are compatible with the multifunctional CAPP decapping tool. This portable accessory makes small tasks such as capping, decapping, and film scraping much easier when used with CAPP Expell 0.2 mL PCR tubes.
A transparent polystyrene design makes it easy for operators to see what they are doing and helps improve efficiency. To minimize contamination of 0.2 mL PCR tubes, the CAPP decapping tool can be sterilized with an ethanol spray.
|5100200C||ExpellPlus PCR tubes 0.2mL, low-binding, bag, 20×1000 pcs.|
|5100201C||Expell PCR tubes, 0.2mL, bag, 20x1000pcs.|
|5100205C||Expell PCR tubes 0.2mL, bag, pre-sterile 20×1000 pcs.|
|5100210C||Expell PCR strips of 8 tubes and separate flat caps 0.2mL, bag, 5x12x10 pcs.|
|5100212C||Expell PCR strips of 8 tubes w/ single attached flat caps 0.2mL, 5x12x10 pcs.|
|5100213C||ExpellPlus PCR plate of 96 x 0.2mL, 8x 25 pcs., clear, kirted|
|5100214C||ExpellPlus PCR plate of 96 x 0.2mL, 8x 25 pcs., frosted, sub-skirted (for ABI cyclers)|
|5100216C||ExpellPlus PCR plate of 96 x 0.1/0.2mL, 8x 25 pcs., clear, fully skirted|
|5100217C||Expell PCR 8-strip and separate optical caps 0.2mL 5x10x12 pcs.|
|5100218C||Expell PCR 8-strip, white, and separate optical caps 0.2mL, 5x10x12 pcs.|
|5100219C||Expell PCR 96-well plate, clear, non-skirted, 0.2mL 5x5x10 pcs.|
|5100220C||Expell PCR 96-well plate, clear, sub-skirted, 0.2mL 5x5x10 pcs.|
|5100221C||Expell PCR 96-well plate, clear, semi-skirted, 0.2mL 5x5x10 pcs.|
|5100400C||Expell PCR 96-well optical sealing membrane, non-sticky adhesive, 10×10 pcs.|
|5100401C||Expell PCR 96-well plate sealing membrane, sticky adhesive, 10×10 pcs.|
|5100402C||Expell PCR 96-well optical sealing membrane, sticky adhesive, 10×10 pcs. (similar to Bio-Rad MSB-1001)|
|5100403C||Expell PCR 96-well aluminium sealing membrane, sticky adhesive, 10×10 pcs.|
|5100450C||Disposable shell frame grid 96 x 0.2mL for ABI cycler, 8×24 pcs.|
|5100451C||Rigid shell frame grid 96 x 0.2mL for ABI cycler, 1 pc.|
|5100452C||Tube and 8-strip decaping tool, 15×1 pc.|