- Analysis and evaluation system for molecular diagnostics
- Fully automatic evaluation, result output and data archiving
- Rapid evaluation using a fluorescence scanner – one slide in less than 20 seconds
- Result output in the form of an overview or a detailed individual result
- Possibility to add comments to the result
- LIS connection and networkability for optimal data communication and integration
CAPP Expell 384 well consumables are made of a special blend of PP, designed for PCR and qPCR applications.
The ExpellPlus 384 range of pipette tips for 384-well pipetting were developed to fit the unique CAPPAero384 range of pipettes. All tips are low retention, which means they are designed to eliminate sample retention and reduce the binding of DNA, RNA and Proteins. Try the CAPPAero384 portfolio and experience a great increase on your throughput, without any compromise on the accuracy and quality of your results. The range also includes a filter tip to prevent any cross-contamination due to aerosol formation and to prevent dangers from toxic, infectious, radioactive or other hazardous materials to carry over.
The CAPPSharp 25 mL Reagent Reservoirs enable a quick liquid transfer for our pioneering line of CAPPAero384 pipettes. They are supplied in two different packaging configurations: Bulk or Individually Wrapped, Sterile. All reservoirs are DNA, RNase and Pyrogen free.
The fully-skirted CAPP Expell 384-well PCR Plates are the ideal choice for PCR and (q)PCR applications, as they fit standard 384-well cyclers and can be used in many 384-well blocks of (q)PCR cycler models. Contact us at firstname.lastname@example.org to receive the compatibility chart. They feature ultrathin walls. which are treated to minimize the binding of proteins and have an evaporation rate of less than 3%, enabling the processing of PCR volumes as small as 5 µL.
Rigid, flat and stackable, the Expell 384 well plates are highly transparent and ideal for applications where the optical qPCR signal is obtained through the bottom of the plate. Fully skirted, CAPP 384 well plates can be used in all standard 384 well cyclers as well as in many 384 well block (q)PCR cycler models. Expell 384 well plates are also ideal for robotic applications, enabling high-throughput and low-volume processing.Thin walled CAPP 384 well plates are specially threated to minimize the binding of proteins. DNA, DNase, RNA, RNase and Pyrogen free, CAPP 384 well plates are autoclavable and have an evaporation grade less than 3%, enabling processing PCR volumes as small as 5µl. Closure can be accomplished with the optical adhesive, cat. no. 5100400C. Contact us for free samples of Expell 384 well plates worldwide.
Cat. No. Description 5030005C ExpellPlus 0.2-50µL, racked, sterile, 5x10x384 5030006C ExpellPlus 0.2-50µL, racked, sterile, filtered, 5x10x384 5100513C Expell 384 well plate, natural, 320 pcs. 5100400C Expell PCR Optical Disposable Adhesive, 100 pcs. CA40520 CAPPSharp Reagent Reservoir, 25mL, bulk, 5×100 pcs. CA40521 CAPPSharp Reagent Reservoir, 25mL, individually wrapped, sterile, 50 pcs.
CAPP 0.2 mL PCR tubes are designed to fit the majority of standard PCR/qPCR thermocyclers operating with regular profile tubes.
The 0.2 mL tubes from CAPP are 21mm high (21.8mm for ExpellPlus). All CAPP 0.2 mL PCR tubes are DNA, DNase, RNA, RNase, Pyrogen free and autoclavable. CAPP 0.2 mL PCR tubes are offered in two product lines: Expell 0.2 mL PCR tubes, which are highly recommended for labs aiming towards high quality operation and working on a restricted budget; and ExpellPlus 0.2 mL PCR tubes securing ultimate quality of the most critical applications.
Both lines come with 0.2 mL PCR tubes as individual single tubes with caps and as strips of 8 tubes with or without caps. On the top of that 0.2 mL PCR plates are availalbe in multiple options.
ExpellPlus 0.2 mL PCR Tubes for the outmost low evaporation rate
The ExpellPlus 0.2 mL PCR Tubes are the ultimate choice for the most critical applications, offering an evaporation rate as low as 3%! Equipped with a V-shaped bottom, ExpellPlus 0.2 mL PCR tubes allow the maximum sample recovery. On the top of that, ExpellPlus 0.2 mL PCR tubes are made of high quality polypropylene and have ultra thin walls for the ultimate temperature transmission and minimal condensation. The specially polished interior of ExpellPlus 0.2 mL PCR tubes minimizes the protein adhesion.
0.2 mL PCR Tubes acc. to Top Cleanliness Standards
CAPP 0.2 mL PCR tubes are guaranteed free of PCR contaminants. Manufactured in a cleanroom facility, CAPP 0.2 mL PCR tubes are subjected to rigorous quality control to ensure they are free from common PCR contaminants such as RNA, RNases, DNA, DNases, pyrogens, and other particulate matter.
Excellent thermal properties of CAPP 0.2 mL PCR Tubes
The thin-walled CAPP 0.2 mL PCR tubes are made from world class polypropylene formulation and are guaranteed to provide excellent heat transfer during temperature cycling. The thin walls of each 0.2 mL PCR tube transfer heat efficiently into the reaction mix with minimum temperature impedance. As a result of the excellent heat transfer, CAPP 0.2 mL PCR tubes have some of the lowest condensation rates. The caps of CAPP 0.2 mL PCR tubes (no pun intended) also ensure a tight seal that keeps evaporation rates well below 5% (Expell) and 3% (ExpellPlus). CAPP 0.2 mL PCR tubes can be safely autoclaved without melting.
CAPP decapping tool for Expell 0.2 mL PCR Tubes
As a bonus, Expell 0.2 mL PCR tubes are compatible with the multifunctional CAPP decapping tool. This portable accessory makes small tasks such as capping, decapping, and film scraping much easier when used with CAPP Expell 0.2 mL PCR tubes.
A transparent polystyrene design makes it easy for operators to see what they are doing and helps improve efficiency. To minimize contamination of 0.2 mL PCR tubes, the CAPP decapping tool can be sterilized with an ethanol spray.
Cat. No. Description 5100200C ExpellPlus PCR tubes 0.2mL, low-binding, bag, 20×1000 pcs. 5100201C Expell PCR tubes, 0.2mL, bag, 20x1000pcs. 5100205C Expell PCR tubes 0.2mL, bag, pre-sterile 20×1000 pcs. 5100210C Expell PCR strips of 8 tubes and separate flat caps 0.2mL, bag, 5x12x10 pcs. 5100212C Expell PCR strips of 8 tubes w/ single attached flat caps 0.2mL, 5x12x10 pcs. 5100213C ExpellPlus PCR plate of 96 x 0.2mL, 8x 25 pcs., clear, kirted 5100214C ExpellPlus PCR plate of 96 x 0.2mL, 8x 25 pcs., frosted, sub-skirted (for ABI cyclers) 5100216C ExpellPlus PCR plate of 96 x 0.1/0.2mL, 8x 25 pcs., clear, fully skirted 5100217C Expell PCR 8-strip and separate optical caps 0.2mL 5x10x12 pcs. 5100218C Expell PCR 8-strip, white, and separate optical caps 0.2mL, 5x10x12 pcs. 5100219C Expell PCR 96-well plate, clear, non-skirted, 0.2mL 5x5x10 pcs. 5100220C Expell PCR 96-well plate, clear, sub-skirted, 0.2mL 5x5x10 pcs. 5100221C Expell PCR 96-well plate, clear, semi-skirted, 0.2mL 5x5x10 pcs. 5100400C Expell PCR 96-well optical sealing membrane, non-sticky adhesive, 10×10 pcs. 5100401C Expell PCR 96-well plate sealing membrane, sticky adhesive, 10×10 pcs. 5100402C Expell PCR 96-well optical sealing membrane, sticky adhesive, 10×10 pcs. (similar to Bio-Rad MSB-1001) 5100403C Expell PCR 96-well aluminium sealing membrane, sticky adhesive, 10×10 pcs. 5100450C Disposable shell frame grid 96 x 0.2mL for ABI cycler, 8×24 pcs. 5100451C Rigid shell frame grid 96 x 0.2mL for ABI cycler, 1 pc. 5100452C Tube and 8-strip decaping tool, 15×1 pc.
CAPP ExpellPlus individually wrapped tips are exceptionally sterile liquid handling tools designed for scientists working with sensitive samples. Each tip is compliant with the most stringent aseptic requirements and is supplied in sterile packaging. ExpellPlus individually wrapped tips are manufactured from CAPP’s unique plastic polymer composition which significantly reduces sample adhesion by maximizing tip hydrophobicity. This translates to superior levels of accuracy and reproducible volumes across different pipetting cycles.
- Sterile and certified free of common biological contaminants including Endotoxins,
DNA, DNases, RNases, and PCR inhibitors
- Superior volume accuracy and reproducibility for dependable pipetting results
- A range of volume capacities to cater for the most common pipetting applications
- Each individual wrap has trackable batch numbers and expiration dates for
transparency and accountability
- Universal compatibility with CAPP’s extensive range of pipettes as well as pipettes
from other leading brands
Cat. No. Description 5030012C ExpellPlus 10 µL, pre-sterile, clear, bag, 5×400 pcs. Individually wrapped tips 5030042C ExpellPlus 10 µL XL, pre-sterile, long, clear, bag, 5×400 pcs. Individually wrapped tips 5030072C ExpellPlus 200 µL, pre-sterile, clear, bag, 5×400 pcs. Individually wrapped tips 5130132C Expell 1000 µL (1250 µL), pre-sterile, clear, bag, 5×200 pcs. Individually wrapped tips
- Sterile and certified free of common biological contaminants including Endotoxins,
BluCAPP 15 mL conical centrifuge tubes are made of high quality PP, which endures the centrifugation force of 16.000 RCF. CAPP centrifuge tubes 15 mL can be sterilized by autoclaving in the temperature of 121°C for 20 minutes. The leak proof caps of BluCAPP 15 mL conical tubes have large ridges, providing the optimal grip when wearing gloves. Additionally, the 3/4 turn closure enables single-handed operation when opening and tightening BluCAPP 15 mL test tubes. Perfectly covering lab’s every day’s needs for sample storage and centrifugation, BluCAPP centrifuge tubes 15 mL have clear and easy to read graduation marks and a large writing area (20x50mm). BluCAPP centrifuge tubes 15 mL come sterile, packed in bags of 25 pcs. CAPP offers also a clinical centrifuge (CRC-656) which along with BluCAPP 15 mL conical centrifuge tubes will be an ideal centrifugation station for your work. Contact us to receive free samples of BluCAPP centrifuge tubes 15 mL and find the optimal 15 mL test tubes for your application.
Cat. No. Description 5100015C BluCAPP centrifuge tubes 15ml, pre-sterile, 20×25 pcs.